Why drinkware outperforms almost every other corporate gift
Cost per impression is the only honest way to compare promotional items, and an insulated bottle wins it easily. It is carried to work, taken into meetings, refilled at the cooler and left on a desk in full view. A branded pen is seen by the person holding it; a branded bottle is seen by everyone in the room, every day, for years.
Below are the bottles, tumblers and mugs in our 2026–2027 catalogue, listed with their real specifications so you can match capacity and insulation to the audience before asking for a price.
Trooper 600ml
Vacuum bottle, black
Thermal tumbler
Glass & bamboo
Insulated stainless steel bottles
Double-walled vacuum bottles in 304 and 18/8 food-grade stainless steel. These are the long-life gifts — engrave them rather than print them, and the logo outlives the campaign.
Bottles with carry straps
Steel bottle, carry loopMatte white finish
500ml · 750ml
Whirl
- Double-walled vacuum insulation, hot or cold for hours
- 100% BPA-free stainless steel, airtight screw-type lid
- 500ml and 750ml (30 × 7.5 cm)
- Blue, black and white
600ml
Trooper
- Double-walled vacuum bottle with carry handle
- Leak-proof lid, silicon finger grip holding lid to body
- Stainless steel inside and out, 24 × 7 cm
- Black and white — also sold as a boxed gift set
450ml
Rotour
- Food-grade 18/8 stainless steel interior
- Hot or cold for 8 hours
- 360° sipping with dual pouring and sipping function
- Push-and-lock button lid, 21 × 7.3 cm
950ml
Stan
- SS304 double-walled flask with a strong carry handle
- Slip-resistant finish, spill-resistant lid
- 950ml, 24 cm high × 9.5 cm diameter
- Black, white and grey
1.2 litre
Stanz
- 1200ml tumbler with ergonomic handle
- Hot or cold for 12+ hours, condensation-free exterior
- Multipurpose lid — sip directly or use the included straw
- Anti-slip matte finish, available in grey
750ml · 1 litre
Hullk
- SS304 with a push-button lid and locking mechanism
- Matte finish for grip, sturdy handle
- 750ml (25 × 7.5 cm) and 1L (28 × 8.5 cm)
- Matte white and black
500ml · 750ml · 1L
Spry
- Holds temperature for more than 10 hours
- Screw-type steel and bamboo lid
- Three capacities, from 22 cm to 32 cm tall
- Black and white, sturdy top handle
550ml
YoSip
- 304 stainless steel, hot or cold up to 12 hours
- Magnetic loop that works as carry handle and phone holder
- Leakproof, BPA-free, 23 × 7.5 cm
- Matte black and matte white
500ml · with speaker
Nomu
- Detachable 3W Bluetooth speaker with RGB lighting in the lid
- 600mAh battery, USB-C charging, up to 6 hours of audio
- Play, pause, volume and call handling
- Double-wall insulation to 12 hours, silicone carry strap
600ml · with cup
Ochaa
- 304 stainless steel, hot or cold up to 12 hours
- 430ml detachable double-walled cup
- Lid with tea-bag and pill storage
- Matte grey and black
500ml · smart
Flacon
- LED temperature display with touch screen
- 304-grade stainless steel, leakproof
- 23 cm high × 6 cm diameter
- The one people pick up and comment on
450ml · with strap
Chasa
- Double-walled thermal tumbler with rope carry strap
- Anti-spill sipper lid
- Black, white and blue with matching strap colours
Thermal tumblers and coffee mugs
Desk-sized drinkware. These suit welcome kits and event giveaways, where the item has to feel good in the hand without carrying a bottle's cost.
Thermal tumbler
In daily use
350ml
B-URT cup
- Vacuum-insulated mug with a bamboo lid
- Stainless steel interior and exterior, dishwasher safe
- 11.5 × 7.5 cm, in black, white and blue
350ml · cork
Bloom
- Vacuum-insulated cork coffee mug
- Hot for up to 5 hours, cold for up to 15
- 18/8 food-grade steel, designed to fit most coffee machines
- 13 × 8.5 cm, black and white
350ml
URT cup and URT-H cup
- Double-wall stainless steel cups, shatter-proof vacuum-sealed lid
- URT-H adds a strong Bakelite handle
- Matt snow white, greige, sapphire blue and black
- 11.5 × 7.5 cm · 200 g
630ml · with straw
Sqrambler
- L304 vacuum tumbler, 18/8 food grade
- Hot and cold up to 6 hours, sliding lid and straw included
- Fits all major car dashboards, 19 × 9 cm
- Black, blue, white and grey
350ml
Wrin cup
- Small insulated cup with a spill-proof slider lid
- Toughened steel with slip-resistant finish
- 13 cm high × 9.5 cm diameter
350ml · two-in-one
Igbo
- Flip the lid for a sipping area, flip it again for a straw
- Leak-proof two-in-one lid
- 15 × 7 cm, black, blue and white
350ml
Starcof
- Double-walled vacuum mug with Bakelite handle
- Push-and-close lid, holds temperature up to 6 hours
- 16 × 7 cm, in black, white, blue and rose gold
500ml
Wrambler
- 304 food-grade thermal mug with a spiral body
- Slide-open lid, clear push-pull sipping cover
- 17.5 × 8.5 cm, powder-coated black, grey, silver and white
700ml
Lawa
- 304 food-grade tumbler, hot or cold up to 12 hours
- Dual-mode sliding sipper with straw hole and reusable straw
- Fits most cup holders and bags, white powder finish
Glass bottles and dining pieces
Cristem glass bottle
550ml · 750ml glass
Cristem
- High-borosilicate glass with a bamboo screw lid and rope handle
- Protective silicon sleeve, BPA and PVC free
- Dishwasher safe, 24.2 cm or 27 cm tall
- Grey, blue, black and white sleeves
1000ml lunchbox
Toshirag
- Dual-compartment SS304 lunchbox with leak-proof locking lid
- Detachable inner container, microwave safe with the lid removed
- Built-in carry handle, 18.5 × 11 × 8 cm
Cutlery set
Cutla
- Knife, fork and spoon in recycled 304 food-grade stainless steel
- Recycled case that locks shut and doubles as a knife rest
- Serrated knife edge, dishwasher safe, 0.15 kg
- A genuine single-use replacement, not a token eco gift
How branded bottles are decorated
Laser engraving is the default on stainless steel. The laser removes the coating to expose the metal beneath, so the mark is permanent, cannot peel and survives a dishwasher — but it appears in the steel's own tone rather than your brand colour.
UV printing is the answer when the logo must stay in brand colours or carries a gradient. It prints full colour directly onto the body with no extra cost per colour, and on a powder-coated bottle it sits crisply.
Screen printing still makes sense on very large runs of single-colour logos, and sublimation covers a whole mug edge to edge where the design is the product. Bamboo and cork elements engrave beautifully. Glass takes frosted engraving rather than a print.
Full detail on every method is on the corporate gifts page, and bottles pair with a notebook and pen in our boxed gift sets.
Choosing the right bottle
- Match the capacity to the use. 350–450ml suits a desk and a commute; 500–750ml is the everyday default; 950ml and above is for site teams, gyms and outdoor work.
- Decide handle or no handle. Bottles that travel in a bag want a slim body; bottles carried by hand across a site want a handle or a strap.
- Pick the lid for the drink. Screw lids seal best for water, push-button and sipper lids suit coffee, and straw lids suit iced drinks and gyms.
- Choose the branding method before the colour. Engraving looks best on matte and powder-coated finishes; UV print needs a colour that your logo reads against.
- Order to a date, not a hope. Allow three to four weeks for stock items with branding, longer in Ramadan and December.
Branded water bottle questions
Can our logo be printed in full colour on a bottle?
Yes, with UV printing, which handles gradients and multiple colours with no per-colour charge. Choose laser engraving instead when permanence matters more than colour — an engraved mark cannot scratch or wash off.
Are these bottles dishwasher safe?
Most stainless steel items in the range are described as dishwasher safe, and engraved branding survives washing. Printed branding lasts longer with hand washing. Bamboo and cork components should always be hand washed.
What is the minimum order for branded water bottles?
Laser engraving and UV printing run economically in smaller quantities because there is no per-colour setup. Screen printing needs a longer run. Send your quantity with the enquiry and we will tell you which method makes sense at that volume.
Can bottles be supplied in gift boxes?
Yes. Individual boxes, printed sleeves and multi-piece sets are all available — the Combistan and Combistar Lux flask-and-cup duos and the Trooper bottle-notebook-pen sets are on the gift sets page.
Do you supply eco-friendly drinkware?
A reusable bottle is itself the sustainable choice, since it replaces single-use plastic. Beyond that the range includes glass with bamboo lids, cork-bodied mugs and cutlery made from recycled 304 stainless steel in a recycled case — see the eco-friendly range.
How long does production take?
Allow three to four weeks for stock items with standard branding, and longer if the colour or capacity has to be imported. Confirm the date in writing before committing, especially in the run-up to Ramadan and year-end.
Send the quantity and the deadline
Tell us how many, roughly what you want to spend per person and when you need them. You get a shortlist against that budget, a branded mock-up on the actual bottle, and a firm production schedule.
Request a quote
Download the catalogue
